Casio QV-2300UX - Manual (Page 131)

CONNECTING TO EXTERNAL EQUIPMENT
E-131
4.
Select the Card Browser setting you want.
When you want this
To turn off the Card Browser (no HTML files
generated)
Maximum performance, including access to
image properties and slideshow capabilities
• This format uses high-level Java Script, and
requires Microsoft Internet Explorer 4.01 or
later or Netscape Communicator 4.5 or later.
Light image viewing with access to image prop-
erties
Basic image viewing with slideshow capabili-
ties
• This format uses high-level Java Script, and
requires Microsoft Internet Explorer 4.01 or
later or Netscape Communicator 4.5 or later.
Basic image viewing
Select this
Off
Type1
Type2
Type3
Type4
5.
After selecting the setting you want, press the
shutter release button.
• When a Card Browser type is selected, a file named
“INDEX.HTM” is created inside the “DCIM” folder
whenever you turn off the camera. Other files are also
created and stored on the memory card at this time.
• Pressing in place of the shutter release button
in step 5 immediately starts creation of Card Browser
files, which is indicated by the message “One moment
please...” on the monitor screen. Never turn off cam-
era power while this message is on the display.
NOTE
• If the memory card in the camera has a large number
of files on it, it may take quite a bit of time for the cam-
era to create the required HTML files and turn off. Be-
cause of this, we recommend that you normally leave
the Card Browser turned off. We suggest that you turn
off the Card Browser if you normally do not need to
use it. The power down routine performed by the cam-
era is much shorter when the Card Browser is turned
off.