Casio QV-2300UX - Manual (Page 119)

CONNECTING TO EXTERNAL EQUIPMENT
E-119
Connecting the Wired Remote Controller
to the Camera
The optionally available wired remote controller lets you op-
erate the camera with touching it. This capability helps to
avoid the effects of unintended camera movement when
shooting at slow shutter speeds or with high telephoto set-
tings with the camera mounted on a tripod. You can also use
it to scroll through images during presentations on a TV
screen. For more information about using the wired remote
controller, see the instructions that come with it.
Wired Remote
Controller Model: WR-1C (QV-2300UX option,
QV-2800UX bundled accessory)
• You can perform the following operations using the wired
remote controller: shutter release, zoom slider, MENU,
, [+], [–], SHIFT INFO, , .
Connecting an External Flash Unit
(QV-2800UX Only)
Use of a commercially available flash unit makes it possible
to obtain a higher level of brightness (guide number) than
you get when using the built-in flash alone. An external flash
also makes it possible to extend the effective range of flash
photography.
• The guide number of the internal flash is 9 (ISO 100/m).
External Flash Unit Requirements
The external flash unit you use with your camera must sat-
isfy the following requirements.
• Configuration: tripod hole mountable grip type with sync
cable; or tripod hole mountable with grip-equipped bracket
and sync cable
• Coverage Angle: Coverage of 40mm equivalent 35mm fo-
cal length lens (without wide conversion lens)
• Some flash performance may be lost when using a ring
flash or other type of unit with a long flash time.
• The aperture values and ISO sensitivity available with
some flash units may not match the values supported by
your camera. In such a case, make adjustments in the ap-
erture and ISO sensitivity settings of the external flash and
the camera until proper brightness is achieved.
• Some flash performance may be lost when using a zoom
flash.
USB VIDEO OUT
DC IN 6V
DIGITAL
Wired
Remote
Controller
DIGITAL terminal