Epson AcuLaser M8000N - Manual (Page 122)

Macintosh environment
Printers do not appear in Chooser.
Cause What to do
You may have selected a wrong one for
“Connect via” in the AppleTalk Control
Panel. Make sure to select Ethernet in AppleTalk Control Panel, and make
sure AppleTalk is active in Chooser. Also, check the network
equipment including the hub cable.
The Bonjour/Rendezvous printer setting is overwritten by the AppleTalk printer setting.
Cause What to do
The same printer is set up with AppleTalk
after the printer is set up with Bonjour/
Rendezvous. Change the AppleTalk printer name so that it does not conflict with the
Bonjour/Rendezvous printer name.
NetWare environment
For users of printers supporting NetWare queue-based printing
Nothing prints even though clients have sent data to the printer.
Cause What to do
Clients may not be registered, or the network
interface may not be logged in to the
NetWare server. Make sure clients are registered as users of the print queue and the
print server. Also, make sure the network interface is logged in to the
NetWare server.
EpsonNet Config will not start correctly.
Cause What to do
Microsoft NetWare Directory Service is
installed on your computer. If you are using the NDS service, install the Novell NetWare Client
service.
EPSON Network Guide
Troubleshooting 122