Epson AcuLaser M8000N - Manual (Page 93)

1. Click Start, point to Programs (for Windows 2000 users) or All Programs (for Windows Vista,
XP, Server 2008, and Server 2003 users), select EpsonNet, and then select EpsonNet Config
V3
.
2. Click EpsonNet Config User’s Guide.
The EpsonNet Config User’s Guide appears. By clicking the links on the front page or contents
page, you can get information on using EpsonNet Config.
EpsonNet Config for Macintosh
About EpsonNet Config
EpsonNet Config for Macintosh is a Macintosh-based configuration software for administrators that
allows you to configure the network interface for TCP/IP.
Note:
Be sure to use EpsonNet Config included on the Software CD-ROM shipped with this product.
Note for Mac OS 9 users:
EpsonNet Config on the Software CD-ROM shipped with this product does not support Mac OS 9. To
configure the network interface, use the previous version of the software (EpsonNet Config Ver.2). You
can download EpsonNet Config Ver.2 from the Epson Web site.
http://support.epson.net/netconfig_down.html
System Requirements
The following table lists the system requirements of EpsonNet Config.
Operating systems Mac OS 10.2.x or higher
Java 1.4 or later is installed
Models PowerPC Macintosh/Intel Macintosh
Memory 150 MB or more
Hard disk drive space 50 MB
EPSON Network Guide
Network Software 93