RISCO Group 5IN2047 Agility3 Full User Manual UK.pdf - Manual (Page 25)

Agility 3 User Manual
Page 25
Chapter 4 - User Functions and Settings
The functions and settings explained in this chapter can only be performed via your LCD
keypad and the Configuration Software. This chapter refers to these functions and settings
as performed via the LCD keypad. Refer to the Configuration Software manual for more
information regarding how these functions and settings are performed via the
Configuration Software.
When using the keypad during the programming mode use the following table to be
familiar with the functionality of the keys:
Function Sequence
Exits from the current menu
Terminates commands and confirms data to be stored
Used to browse through the menu: Scrolls up a list or moves the cursor
Changes data
Numerical keys are used to input the numeric codes that may be required
for setting, unsetting, or used to activate specific functions
4.1 User Codes
To perform many of the Agility functions, a security code (often called a user code) must
be used. Each individual using the system is assigned a user code, which, in turn, is linked
to an Authority Level. Those with a "higher authority" have access to a greater number of
system functions, while those with a "lower authority" are more restricted in what they
may do. There are four different authority levels available for users of the Agility.
Notes: Agility can support up to 31 different user codes and 1 Master code. User codes
may have variable lengths up to 6 digits.
Your Agility was given a Grand Master Code of 1-2-3-4 during manufacturing.
Unless your alarm company has already changed it to suit your preference, it's best
to modify this code to one that is unique and personalized as herein described.