RISCO Group 5IN2047 Agility3 Full User Manual UK.pdf - Manual (Page 36)

Agility 3 User Manual
Page 36
Appendix A - Keypad User Operations
The following section details the user operations from the 2-way LCD wireless keypad.
User operation can be defined to be activated by a quick mode or high security mode that
requires the use of a code or proximity tag.
In the high security mode the proximity tag can be used as a substitute for inserting a user
code when the display prompts to "Insert a code".
Common Operations
Operation Quick Operation High Security Mode 1
 Full Set
 Press  Press
followed by code or proximity tag 2
 Part Set
3  Press
 Press
followed by code or proximity tag

 Full
Unset

 Press
followed by code or proximity tag
Consult your engineer for the operations defined with a code
For optimal use of the proximity tag, use it from a distance of 1-2 cm (0.4" - 0.7") from the
center of the keypad's door
For Part set Setting with no entry delay hold the key for two seconds
Advanced Operations
Operation 1 Quick Operation High Security Mode
Full Setting Partition
1/2/3 Select partition
/ / and press
Select partition / / and
press followed by code or
proximity tag
Part set Setting
Partition 1/2/3 Select partition
/ / and press
Select partition / / and
press followed by code or
proximity tag
Partition 1/2/3
Unset
Select partition / / and press followed by
the code or the proximity tag
Panic alarm / Service
call
Press and hold both keys simultaneously 4