RISCO Group 5IN2047 Agility3 Full User Manual UK.pdf - Manual (Page 33)

Agility 3 User Manual
Page 33
Operation Grand
Master User Engineer
Advanced

View IP Address: Use this option to view
the IP address of the Agility.
√ - -
Advanced

CS Connect: Enables to establish
communication with the configuration software at a
predefined location through IP or GPRS.
√ - √
Advanced

Exit/Entry Beeps: Enables to control the
exit/entry beeps of the current keypad.
√ - √
Follow Me
Define: Used to define Follow Me destinations phone
number or Email address according to its type: Voice
message, SMS or E-mail √ - √
Test FM: Used to test Follow Me reporting. √ - √
Codes/Tags
Use this menu to set tags and user codes in the system.
For detailed information refer to Chapter 4, page 25. √ √ -
Clock
Time & Date: Allows the setting of the system time and
date. This definition is required for setting the scheduler
programming in the system. √ - √
Scheduler: Enables you to activate or deactivate
preprogrammed schedules that were defined by your
engineer. Up to 8 weekly programs can be defined in the
system during which the system automatically sets /
unsets or activates programmable outputs. √ - √
Event Log
To view a list of system events that have occurred √ - √
Service Information
Allows the display of any previously entered service
information. (Name and phone) √ √ -
Macro
Enables the engineer or GM to record a series of
commands and assign them to a macro. For more
information refer to section 4.5 Macro keys page 30. √ - √