RISCO Group 5IN2047 Agility3 Full User Manual UK.pdf - Manual (Page 9)

Agility 3 User Manual
Page 9
Status Button / Service Call (Listen & Talk)
The button on the main unit can be defined as a system status indicator or as a S.O.S
button. Once pressed, a service call can be established to the alarm receiving centre,
which then enables 2-way communication with the premises.
Voice Messaging
Three types of spoken messages are heard when using the Agility, locally in the
premises or remotely to your mobile:
Event messages: Upon selected event occurrence, the Agility initiates a call to a
remote Follow Me (FM) telephone number, informing you of a security situation by
playing a pre-recorded Event announcement message.
Status messages: Upon remote access of the system by initiating a call from a
remote telephone or receiving a call from the system, the Agility announces the
current system status by playing a pre-recorded Status message.
Local Announcement messages: Upon event occurrence or user’s keypad
operations, the Agility can announce various local messages to residents.
SMS Messaging
Using the GSM/GPRS Module the system can send predefined SMS event messages to a
remote Follow Me (FM) telephone number, informing you of the status of the security
system and certain events that occurred in the system.
For example:
Email Messaging
Using the Agility IP Module or the RISCO Cloud, the system can send event messages by
Email to predefined e-mail addresses informing you of the status of the security system
and certain events that occurred in the system.
For example:
Subject: Alarm Security Message: Intruder Alarm
System Name: John's Residence
Event: Fire Alarm, Zone 5, Entrance door
Time: 01 April 2008; 16:12
Partition: Partition 1, First floor
Service Contact: Alarm Receiving Centre 01, 03-5676778