RISCO Group 5IN2047 Agility3 Full User Manual UK.pdf - Manual (Page 26)

Agility 3 User Manual
Page 26
Setting / Changing User Codes
The user assigned the Grand Master authority level can change all user codes but cannot
view the digits in the user code fields. Users with other authority levels can only change
their own codes. The system must be unset in order to set or change user codes.
Note: User codes can also be defined from the web application
 To set/change a user code:
1. Press and
2. Enter your code
3. Using the arrow keys, scroll to the option Codes/Tags and press .
Note: If you enter a wrong user code, the keypad produces 3 short beeps and the "Wrong
Code. Please Try Again" message will be heard. Press quickly and re-enter
the above sequence correctly.
4. Scroll to Access Codes and press .
5. You will see the option New/Change. Press
6. Using the arrows scroll to select the User Index number to which you want to
assign a user code and press .
Note: In the Agility system, the User Index number is from 00 to 31, where 00 belongs to
the Grand Master.
7. Enter the new code and then re-enter the code. If successful, a single
confirmation beep is sounded, if not, 3 quick error beeps are sounded
8. Repeat the above steps for additional codes until you have completed your list
Deleting User Codes
At times, you may want to completely delete a user code. Note that it is impossible to
delete the Master Code (although it can be changed).
The system must be unset in order to delete user codes.
 To delete a user code:
1. Follow steps 1-4 of the previous procedure (See Setting/Changing User Codes)
2. Scroll the menu to the option "Delete Code". Press
3. Using the arrows scroll to select the User Index number which you want to
delete and press .