RISCO Group 5IN2047 Agility3 Full User Manual UK.pdf - Manual (Page 27)

Agility 3 User Manual
Page 27
4. The display will show: "Delete User. Are you sure?". Use the key to select
[Y] and press . If successful, a single confirmation beep is sounded, if not, 3
quick error beeps are sounded
5. Repeat the above steps for deleting additional codes
4.2 Proximity Tags
The bi-directional keypad enables you to replace the use of a code with a proximity tag to
set and unset the security system or to activate and deactivate home appliances and
utilities, such as heating and lights. Proximity tag programming is performed from the
User Functions menu. When programming a proximity tag, the following three options are
available:
Adding a new tag
Deleting a tag by the user index
Deleting a tag by the user tag
Adding a Proximity Tag
The Grand Master can assign a tag to any user in the system. Each proximity tag can be
assigned to only one user.
 To add a proximity tag:
1. Press
2. Enter your user code
3. Using the arrow keys scroll to the option Codes/Tags from the User Functions
menu and press
4. Scroll to Proximity Tags and press .
5. Select the option New/Change. Press .
6. Using the arrows scroll to select the User Index number to which you want to
assign a tag and press .
7. Within 10 seconds, hold the proximity tag at a distance of 1 to 2 cm. from the
keypad’s keys. The keypad automatically reads the proximity tag and saves it into
the system’s memory. Once the proximity tag has been successfully recorded, a
long confirmation beep sounds, and a confirmation message is displayed. If the
proximity tag is already stored in the system’s memory, 3 error beeps will sound
and a reject message will appear.