Amprobe Multitest-1000 Continuity-Tester - Manual (Page 9)

3. PREPARATION FOR USE
3.1. INITIAL CONTROL
This instrument has been checked mechanically and electrically prior to shipment.
Care has been taken to ensure that the instrument reaches you under safe conditions.
However, you are recommended to perform a rapid check to detect any possible damage
that may have been caused during transport. Should this be the case, immediately contact
Amprobe.
Assure the packaging contains all the parts listed under paragraph 9.3. In case of
discrepancies contact the dealer.
In case you have to send the instrument back please follow the instructions reported in
paragraph 10.
3.2. POWER
SUPPLY
Six AA batteries not included in the package supply the instrument. To replace batteries
follow the instructions in paragraph 8.2.
When batteries are low the symbol
is displayed. To replace batteries follow the
instructions indicated in paragraph 8.2.
3.3. CALIBRATION
The instrument fulfils the technical specifications listed in this manual. The performance of
the specifications is guaranteed for one year.
3.4. STORAGE
In order to assure the accuracy of the measurements, after a period of storage in extreme
environmental conditions, wait for the instrument to return to normal operating conditions
(see environmental specifications listed in paragraph 9.2.1).