Epson PhotoPC 3100Z - Manual (Page 132)

Presenting Your Photos 14-8
4 Specify the key combination you want to use to take your
screen captures in the
Hot Key setting box. Click the
ALT , CTRL , or SHIFT checkbox, then select a function
key from the list. The default hot key is F5 .
5 Click Start to activate the key combination. The key
combination remains active only for the current session.
When the key combination is activated, the Start
button changes to a Stop button.
To deactivate the hot key combination, press the Stop
button.
6 Start your application and open the file to the page or
image you want to capture.
NOTE
◗ The entire screen is captured, not just the active
window. Make sure you maximize your presentation
before you capture it. If you set your application to
“slide show” mode (or the equivalent) you can capture
just the image you want, without menus and other
screen elements. See your application’s documentation
for instructions.
◗ Presentations using large font sizes (at least 18 points)
work best.
7 Press the hot key combination you selected. Your screen
capture is assigned a file name and saved to the folder
that you specified.
You can take as many screen captures as you’d like;
simply open each file you want to capture and press your
hot key combination again.
8 When you’re finished, close your application and click
the
Stop button on the Screen Capture dialog box. The
key combination you selected is erased.
/HJHQGERRN 3DJH  0RQGD\ $SULO     30