Deselecting all photos, Adjusting photos for printing – Epson PhotoPC 3100Z User Manual
Page 89
Selecting Images for Printing 8-3
Deselecting All Photos
1
Turn the camera dial to
and press the
POWER
button.
2
You see the PRINT IMAGE
menu.
3
To deselect all the selected
photos, press the button
next to
All Reset
.
4
When you see a confirmation screen, press the button
next to
Yes
to deselect all the photos. Press the button
next to
No
to preserve your selections.
NOTE
If you have made any brightness or sharpness adjustments,
they are not removed when you deselect all the images. To
remove these adjustments, set them back to the standard
setting, as described in the next section.
The numbers are set to 0 and the images appear in black
and white. You can re-select images by pressing the
t
print button, as described in the previous section.
Adjusting Photos for Printing
You can adjust the brightness and sharpness of your JPEG
photos for printing. These settings will be read by a PRINT
Image Matching enabled printer. The adjustment settings do
not change the appearance of the actual source image.
1
Set the camera dial to
and press the
POWER
button.
2
You see the PRINT IMAGE
menu.
/HJHQGERRN 3DJH 0RQGD\ $SULO 30