Epson PhotoPC 3100Z - Manual (Page 43)

Taking Pictures 2-18
Checking the Picture Counter
The large number in the lower right of the status display
panel shows how many additional pictures you can take.
This number is determined by the image quality (resolution)
and compression settings. Also, if you have any audio and/or
video recordings stored on your memory card, the number
on the display panel may be greater than the actual number
of remaining pictures.
When the memory card is full, the number on the display
panel reads
0 , the camera status light on the back of the
camera flashes red, and you can no longer use the shutter
button. Before you can take any more pictures, you need to
delete some of the images on the memory card. (See page 6-3
for instructions.)
If you want to save your photos before you delete them,
connect the camera to your computer (as described in
Chapter 9), then transfer the pictures (as described in
Chapter 10).
Checking Other Status Information
Instead of the number of pictures remaining, you may see
one of the following in the lower right corner of the status
display panel:
◗ In Program mode or Manual mode, the
exposure value appears on the left and the
shutter speed appears on the right when
you hold the shutter button down halfway.
See page 1-10 for more information about
user modes.
◗ When you turn the camera’s dial to ,
SEt is displayed. No other information
appears in the status display panel.
◗ While you make an audio recording, rEc
appears in this space.
◗ While you take photos using the interval
shooting feature,
Int appears on the
display panel.
/HJHQGERRN 3DJH  0RQGD\ $SULO     30