Epson PhotoPC 3100Z - Manual (Page 15)

Setting Up Your Camera 1-2
Installing Batteries
Before you install (or remove) batteries, make sure the
camera is turned off.
1 Hold the camera upside down.
2 Press and hold down the battery cover lock and slide the
cover out to open it.
3 Insert four batteries into the compartment, positioning
the + and
− ends as shown below.
4 Lower the battery cover and slide it in, as shown below.
When the battery power is almost out, a low battery icon
appears on the camera’s display panel. Be sure to replace
all four batteries at the same time.
battery cover
lock
/HJHQGERRN 3DJH  0RQGD\ $SULO     30