Epson PhotoPC 3100Z - Manual (Page 21)

Setting Up Your Camera 1-8
Setting the Date and Time
Before you use the camera, you need to set its clock. Then
the camera will automatically record the date and time for
each picture you take. If you remove the batteries for an
extended period of time (without connecting the camera to
an optional AC adapter), you will need to reset the clock. To
set the date and time:
1 Turn the camera dial to . Press the POWER button
to turn on the camera.
2 You see the clock setting
screen with the month
highlighted in red.
3 Press the button next to the
up or down arrows to
increase or decrease the
number, until the month is correct.
4 Press the button below the right arrow to select the day,
year, and time (military time format). Make adjustments
as described in the previous step.
5 Press the button next to the date display format
to change it to
M.D.Y. (12/31/2001), D.M.Y.
(31/12/2001), or Y.M.D. (2001/12/31).
6 When you’re finished, press
the button under
BACK .
You see the SETUP menu.
Now you’re ready to format the memory card.
/HJHQGERRN 3DJH  0RQGD\ $SULO     30