Epson PhotoPC 3100Z - Manual (Page 67)

Adjusting Exposure and Color Settings 5-10
Setting the Custom White Balance
1 Remove the camera’s lens cap and press the POWER
button to turn on the camera.
2 Turn the camera dial to to display the SETUP
menu. If necessary, change to Program or Manual user
mode.
3 Press the button next to
Shot SETUP to go to the
Shot SETUP menu.
4 Press the button below New
W/B .
5 You see a screen asking you if you want to save a new
setting. Press the button next to
Yes to save a new
custom white balance setting.
The camera’s lens moves out (if it isn’t already out). You
see a message and a framed area that the camera’s lens
uses to set the white balance.
6 Focus the camera on a piece of white paper, or some
other object by which to set the white balance, and press
the shutter button to save the setting.
7 Press the button under BACK to return to the main
SETUP menu.
/HJHQGERRN 3DJH  0RQGD\ $SULO     30