Epson PhotoPC 3100Z - Manual (Page 18)

Setting Up Your Camera 1-5
4 After securing the fastener, turn it so that the screw
sleeve is covered by the strap, as shown below.
5 Repeat steps 1 through 4 to attach the other end of the
strap to the other side of the camera.
Attaching the Lens Cap
To secure the lens cap to the camera:
1 Pass the end of the string with the shorter loop through
the eyelet on the edge of the lens cap.
2 Then, pass the end of the string with the longer loop
through the shorter loop.
3 Pull the end of the string with the longer loop all the
way through.
/HJHQGERRN 3DJH  0RQGD\ $SULO     30