PLANET VIP-351PT - Manual (Page 20)

[20/52]
8. Press ‘Down’ key until ’13. SIP Password’ is selected, then press ‘Select’ key. Please
use the numeric keypad to enter SIP phone number here, which is assigned by your
service provider.
NOTE: SIP password is hidden by a series of ‘+’ mark when you’re not editing it.
9. Now you have to set the audio codec of this IP Phone, press ‘Down’ key until ’15.
Codec’
is selected, then press ‘Select’ key. Use ‘Up’ or ‘Down’ key to select a codec
designated by your service provider, and press ‘Save’ key to make decision.
10. After all above settings are done, please press ‘Down’ key until ’16. Commit Changes’
is selected, then press ‘Select’ key. You’ll see ‘Changes saved’ message displayed on
LCD screen, which means all settings are saved.
03:12 09/09 0123456
14. SIP Password
1234567890 ▊
15. Codec
2. Auto – G.711u
Save Clear Cancel
03:12 09/09 0123456
15. Codec
2. Auto – G.711u
16. Commit Changes
Save changes
Save
03:12 09/09 0123456
15. Codec
2. Auto – G.711u
16. Commit Changes
Changed saved
Select Exit