Roland V-800HD MKII Multi-Format Video Switcher - Manual (Page 3)

3
USING THE UNIT SAFELY
001-50
Make sure that the power cord is grounded.
• Connect mains plug of this model to a mains socket outlet
with a protective earthing connection.
.................................................................................................................................................
002a
Do not disassemble or modify by yourself.
•
Do not open or perform any internal modifications on the
unit.
.................................................................................................................................................
003
Do not repair or replace parts by yourself.
•
Do not attempt to repair the unit, or replace parts within it
(except when this manual provides specific instructions
directing you to do so). Refer all servicing to your retailer,
the nearest Roland Service Center, or an authorized Roland
distributor, as listed on the “Information” sheet.
.................................................................................................................................................
004
Do not use or store in the following types of locations.
• Subject to temperature extremes (e.g., direct sunlight in
an enclosed vehicle, near a heating duct, on top of heat-
generating equipment); or are
• Damp (e.g., baths, washrooms, on wet floors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and shakiness.
.................................................................................................................................................
006a
Do not place in an unsuitable location.
•
When using the unit with a rack or stand recommended by
Roland, the rack or stand must be carefully placed so it is
level and sure to remain stable. If not using a rack or stand,
you still need to make sure that any location you choose for
placing the unit provides a level surface that will properly
support the unit, and keep it from wobbling.
.................................................................................................................................................
008e
Use only the included power cord.
•
Use only the attached power-supply cord. Also, the
supplied power cord must not be used with any other
device.
................................................................................................................................................
008f
Connect the power cord to an outlet of the correct voltage.
•
The unit should be connected to a power supply only of the
type described in the operating instructions, or as marked
on the side panel of unit.
................................................................................................................................................
009
Do not bend the power cord or place heavy objects on it.
•
Do not excessively twist or bend the power cord, nor place
heavy objects on it. Doing so can damage the cord,
producing severed elements and short circuits. Damaged
cords are fire and shock hazards!
................................................................................................................................................
011
Don’t allow foreign objects or liquid to enter unit ; never place
containers with liquid on unit.
•
Do not place containers containing liquid on this product.
Never allow foreign objects (e.g., flammable objects, coins,
wires) or liquids (e.g., water or juice) to enter this product.
Doing so may cause short circuits, faulty operation, or other
malfunctions.
................................................................................................................................................
012a
Turn off the unit if an abnormality or malfunction occurs.
•
Immediately turn the unit off, remove the power cord from
the outlet, and request servicing by your retailer, the
nearest Roland Service Center, or an authorized Roland
distributor, as listed on the “Information” sheet when:
• The power-supply cord or the plug has been damaged;
or
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid has been spilled onto
the unit; or
• The unit has been exposed to rain (or otherwise has
become wet); or
• The unit does not appear to operate normally or exhibits
a marked change in performance.
................................................................................................................................................