Roland V-800HD MKII Multi-Format Video Switcher - Manual (Page 51)

51
Menu Operations
The V-800HD’s setting menus are displayed on the multi-view monitor. Menu operations follow the flow described below. For
information on the details of menus and their items, download “Reference Manual” from the following Roland website.
http://www.rolandsystemsgroup.net/
1. Display the menu.
Press the [MENU] button to display the menu. Displayed initially is the first level, shown below.
fig.1st-level-menu.eps
2. Select the target menu.
Use the up and down [CURSOR] buttons to select the target menu. After making the selection, press the [ENTER] button to display
the items that the menu contains.
fig.select-menu.eps
3. Select the item whose setting you want to change.
Use the up and down [CURSOR] buttons to select the target item. If the items span two or more pages, triangle symbols are
displayed at the top of the screen. When these symbols are displayed, you can use the left and right [CURSOR] buttons to change
the page shown. Also, when [ENTER] is displayed at the top of the screen, you can move down one level by pressing the [ENTER]
button.
fig.select-item.eps
4. Change the setting value.
If the displayed setting value is highlighted, you can change the value by turning the [VALUE] dial.
* You can change a setting value up or down by 10 units at one time by holding down the [ENTER] button and turning the [VALUE] dial. You can
also return the setting value to its factory default by holding down the [ENTER] button and pressing the [EXIT] button.
fig.value-dial.eps
5. Exit the menu.
Press the [EXIT] button to quit the menu screen.
The setting value is not stored in internal memory unless it is saved to a [MEMORY] button. Refer to “Saving Settings to MEMORY Buttons” (p. 43)
and save the settings before turning off the power.
PinP
Key
Transition
DSK
Input
Output
System
Set parameters of Picture in Picture.
Set parameters of key compositions.
Set parameters of transition effects.
Set parameters of DSK composition.
Set input parameters like source assignments.
Set output parameters like output formats.
Set system configuration of the V-800HD.