Roland V-800HD MKII Multi-Format Video Switcher - Manual (Page 57)

57
V-800HD Version 1.50 Added Functions
AUX Output of the Input Signal
• You can directly send the input channel signal to the AUX bus. However, you cannot use DSK while you are selecting input
signal
• Use menu to select the channel to be sent to AUX bus.
Selection of the Recalling Parameter
• You can select the parameters to recall when you operate the MEMORY buttons.
Automatic Memory Save
• If this is turned on, the current status of the V-800HD is saved to memory 1-1 automatically. The status is loaded at next booting
and the status returns.
• The auto saving is carried out when you operate any menu cursor. Auto saving does not work when cross-point buttons or
video fader is operated.
Expanded Color Correction Range
• The range of color correction is expanded.
Fine Adjustment of Chroma Key HUE
• The extraction color was fixed to blue or green in previous version. Now it’s possible to fine adjust the color.
• Width is same as Hue adjustment of previous version.
Menu Items Setting Value
Output -> AUX Source
Mixer Input, Mixer Output, DSK Source,
DSK Output, Input CH.1, ... Input CH.10
Menu Items Setting Value Explanation
System -> Memory Recall Parameters ALL
This recalls all the parameters (same as
previous version)
Cross-point
This recalls the parameters below only.
- Channel selection
- Key setup
- PinP setup
- DSK setup
- Wipe setup
- Input connector selection
Menu Items Setting Value
System -> Auto Memory ON, OFF
Menu Items Setting Value
Output -> Format Main -> Color Correction
Brightness -128
-
+127
Contrast -128
-
+127
Saturation -128
-
+127
Menu Items Setting Value
Key -> Hue
Fine -128
-
+127
Width -128
-
+127