Roland 6-Channel HD Video Switcher with Audio Mixer & PTZ Camera Control (1 RU) - Manual (Page 15)

15
Video Input/Output Settings
Adjusting the Input Video
This adjusts the image quality of the video input via the respective
connectors. For HDMI IN and RGB/CMPNT/CMPST IN6 connectors,
you can also adjust the scaling.
1. Select the [MENU] button 0 “VIDEO INPUT” 0
the input video.
A menu for the selected input video appears.
2. Select a menu item, then use the [VALUE] knob to
adjust the input video.
SDI IN 1–4: SDI IN 1–4 connectors
Menu item Explanation
H FLIP
Setting this to “ON” flips the input video
horizontally.
BRIGHTNESS This adjusts the brightness.
CONTRAST This adjusts the contrast.
SATURATION This adjusts the saturation.
HDMI IN 5: HDMI IN 5 connectors
Menu item Explanation
FLICKER FILTER Setting this to “ON” reduces flicker.
ZOOM This adjusts the zoom ratio.
SCALING TYPE This sets the scaling type.
MANUAL SIZE H (*1) This adjusts the horizontal size.
MANUAL SIZE V (*1) This adjusts the vertical size.
POSITION H
This adjusts the display position in the
horizontal direction.
POSITION V
This adjusts the display position in the
vertical direction.
H FLIP
Setting this to “ON” flips the output video
horizontally.
BRIGHTNESS This adjusts the brightness.
CONTRAST This adjusts the contrast.
SATURATION This adjusts the saturation.
RED This adjusts the red level.
GREEN This adjusts the green level.
BLUE This adjusts the blue level.
EDID
This sets the input format (EDID) for the
HDMI IN 5 connector (p. 13).
(*1) This is available when “SCALING TYPE” is set to “MANUAL.”
HDMI/ANLG IN6:
HDMI IN 6 connector (*2), RGB/CMPNT/CMPST IN 6 connector (*2)
Menu item Explanation
INPUT ASSIGN This selects the video signal that is input.
AUTO SAMPLING
(*3)
This automatically adjusts the image
quality.
FLICKER FILTER Setting this to “ON” reduces flicker.
ZOOM This adjusts the zoom ratio.
SCALING TYPE This sets the scaling type.
MANUAL SIZE H (*4) This adjusts the horizontal size.
MANUAL SIZE V (*4) This adjusts the vertical size.
POSITION H
This adjusts the display position in the
horizontal direction.
POSITION V
This adjusts the display position in the
vertical direction.
H FLIP
Setting this to “ON” flips the output video
horizontally.
BRIGHTNESS This adjusts the brightness.
CONTRAST This adjusts the contrast.
SATURATION This adjusts the saturation.
RED This adjusts the red level.
GREEN This adjusts the green level.
BLUE This adjusts the blue level.
FREQUENCY (*3) This adjusts the input frequency.
PHASE (*3) This adjusts the phase.
EDID
This sets the input format (EDID) of the
HDMI IN 6 connector or RGB/CMPNT/
CMPST IN 6 connector (p. 13).
(*2) The settings on the HDMI/ANLG IN 6 menu change in tandem
with the assignment made using “INPUT ASSIGN” (p. 13). You can
make separate individual settings for the respective menu items
for the HDMI IN 6 signal, the RGB/COMPONENT signal, and the
COMPOSITE signal.
(*3) This is effective when “INPUT ASSIGN” (p. 13) is set to “RGB/
COMPONENT.”
(*4) This is available when “SCALING TYPE” is set to “MANUAL.”
3. Press the [VALUE] knob to apply the setting.
4. Press the [MENU] button to quit the menu.