Roland 6-Channel HD Video Switcher with Audio Mixer & PTZ Camera Control (1 RU) - Manual (Page 36)

36
Other Features
Preventing Unintended Operation (Panel Lock)
This locks operation of buttons and knobs to prevent unintended
operation of the XS-62S.
1. Select the [MENU] button 0 “SYSTEM” 0 “PANEL
LOCK.”
2. With the cursor positioned at “ENTER,” press the
[VALUE] knob.
The PANEL LOCK menu appears.
3. Select a target for panel lock, then use the [VALUE]
knob to specify whether panel lock is enabled (ON)
or disabled (OFF).
You can select the following menu items as targets for panel lock.
Menu item Target of panel lock
MENU+EXIT [MENU] and [EXIT] buttons
VALUE [VALUE] knob
CROSS POINT Cross-point [1]–[8] buttons
SW MODE [SW MODE] button
FREEZE [FREEZE] button
PinP [PinP] button
DSK [DSK] button
TAKE [TAKE] button
AUTO MIXING SW [AUTO MIXING] button
CH VOLUME AUDIO MIXER [1]–[5/6] knobs
MASTER VOLUME [MASTER] knob
4. Press the [VALUE] knob to apply the setting.
Repeat steps 3 and 4 as needed.
5. Press the [MENU] button to quit the menu.
6. Press and hold the [EXIT] button and the [MENU]
button at the same time (for 3 seconds or longer).
The message “PANEL LOCKED” is displayed, and panel lock is
turned on. The button and controls that you set to enabled (ON) in
step 3 are locked.
7. To turn off panel lock, again press and hold the
[EXIT] button and the [MENU] button at the same
time (for 3 seconds or longer).
The message “LOCK RELEASED” is displayed, and panel lock is
turned off.
Operating the XS-62S or an External
Device by Remote Control
You can remotely control the XS-62S from a computer, or remotely
control an externally connected camera.
Using the dedicated XS-62S RCS program
You can connect the XS-62S to a computer via a CONTROL (LAN)
connector, and use dedicated program XS-62S RCS to operate the
unit by remote control.
For more information about operation methods, refer to the
owner’s manual included with XS-62S RCS.
LAN
RS-232
XS-62S RCS
“XS-62S RCS” can be downloaded from the Roland website listed
at the bottom of the page.
Using RS-232 or the CONTROL (LAN) connector
You can operate the XS-62S remotely from an external device.
Using RS-422 connector
You can connect a VISCA-compatible video camera to the RS-422
connector and operate the camera remotely from the XS-62S.
Roland website
XS-62S RCS can be downloaded from the Roland website.
For details on the specifications of the RS-232 connector
and RS-422 connector, and for details on remote control,
refer to the “Reference Manual” (PDF) which you can
download from the Roland website.
https://proav.roland.com/