Canon MT-26EX-RT Macro Twin Lite - Manual (Page 25)

25
Adjusting the Flash Unit
A commercially-available filter can be
used during flash photography. A filter
can be attached, using the two
procedures described below. Filters may
not be used together with some macro
lenses.
(1) Attach a 58 mm filter to the filter mounting thread of the mount ring
(see the above illustration).
(2) Attach the flash unit to the lens with the filter attached to the front of
the lens (filter mounting thread).
*1: The lens cannot be used with a filter, since focusing is interrupted by an
attached filter touching the front of the lens. Also, filter may be damaged or the
lens malfunction may result.
*2: Attach a filter to the front of the lens before attaching Macrolite Adapter (p.21) to
the front part of the filter. If attachment threads are not provided on the front rim
of the filter, the flash unit cannot be attached since Macrolite Adapter cannot be
attached. Note that if the flash unit is attached after a filter and Macrolite
Adapter are attached to the front of the lens, the periphery of the photo may
look darker.
*3: Attach the Lens Hood ES-27 to the front of the lens before attaching a 49 mm
filter.
Using a Filter
Macro Lens
Filter Compatibility
(1) (2)
EF50mm f/2.5 Compact Macro Not usable*
1
Usable
EF100mm f/2.8 Macro
Usable
EF100mm f/2.8 Macro USM Not Usable
EF100mm f/2.8L Macro IS USM
Conditionally
usable*
2
EF180mm f/3.5L Macro USM
EF-S35mm f/2.8 Macro IS STM
Conditionally
usable*
3
EF-S60mm f/2.8 Macro USM Usable
MP-E65mm f/2.8 1-5x Macro Photo Not Usable