Canon MT-26EX-RT Macro Twin Lite - Manual (Page 88)

88
This section describes multiple flash
shooting with slave C added to flash
heads A and B.
1
Set the flash mode to < a >.
Press the < E > button.
Turn < 9 >, select < Q >, then
press < 8 >.
2
Set < l > and < 6 >.
Press the < , > button.
Turn < 9 >, select < W >, then
press < 8 >.
3
Check the transmission channel.
If the channels of the master unit and
slave unit are different, set them to
the same number (p.86).
4
Set slave C and position it.
Set the firing group of the slave unit to
C, and position the unit within the
range shown on page 82.
a : Multiple Flash Photography with
Slave C Added
C