Canon MT-26EX-RT Macro Twin Lite - Manual (Page 73)

73
a : Multiple Flash Photography with Slave C Added
Since the following functions set on the master unit will be set
automatically to the slave units with this wireless system, you do not
need to operate the slave unit(s). For this reason, you can perform radio
transmission wireless multiple flash photography in the same way as
normal flash photography.
You can designate two or more master units. By preparing multiple
cameras with master units attached, you can change cameras while
keeping the same lighting (slave units) during wireless multiple flash
photography.
Note that when using two or more master units, the display on the LCD
panel will change depending on the order in which the master setting
was performed. The first master (main master) is displayed as
<
M >, and the second and subsequent masters (sub-masters)
are displayed as < v >.
Multiple Flash Photography with Wireless Functions
• Flash exposure compensation
( f /p.40)
• High-speed sync
( c /p.43)
• FEB ( g /p.41) • Manual flash (p.45, 76)
• FE lock (p.42)
Master Units
If < w > is displayed on the LCD panel, the connection has not been
established. After checking the transmission channel and wireless radio
ID, turn each master unit off and on again.
During radio transmission wireless multiple flash shooting, limit the total
number of masters and slaves up to 16 units.
< Y > and < E > are displayed when function button 4 < ] >
is pressed.
You can take pictures even when the master flash is set as a sub-master.