DNP DS-Tmini Kiosk Order Terminal - Manual (Page 163)

Photo Editing Software User Manual
163
Card Printer Setup
Photo card producta is possible only when a HID Fargo DTC1250e card printer is connected and installed to
the system.
Please contact you DNP reseller to purchase this Card printer model.
1. Enter into Main Panel by touching in sequence the lower left and right corners of the monitor.
2. Select Diagnostics .
3. Power on the Card printer and connect the USB cable. Select install card printer driver .
4. When the message on the screen disappears, the Card printer will be installed.
Attention:
Do not make any changes of Card Printer DTC 1250E driver properties. If you move and disconnect your
system, do not change the USB port you installed your photo card printer.