DNP DS-Tmini Kiosk Order Terminal - Manual (Page 170)

Photo Editing Software User Manual
170
13. Change Mode: Photo Editing Software vs Party Print
By default the system is configured to Photo Editing Software, so to change the system configuration to Party
Print the configuration mode must be changed.
If you have a PartyPrint with the Snap Lab, please connect the PartyPrint license dongle to the Snap Lab and
change the Wi-Fi Router and turn it on.
Change to Party Print Mode
1. Exit the software.
2. Enter into Main Panel by touching in sequence to the lower left and right corners of the monitor.
3. Click the Quit Application button.
4. Please wait for a few seconds.
5. The system will show up another application called LaunchPad.
6. To change the mode, click the Advanced button.