Home Dynamix ANEXX A - Manual (Page 128)

4 Ports 11g Wireless ADSL2/2+ Router 121
„ Power Level: Select “Full”, “50%”, “25%”, “12%” or “6%” Power Level from the drop down manual.
The default is “Full”.
„ Video Blast Support: Place a check to enable the Video Blast functionality. Check the following
items when Video Blast features is enabled. When checked, priority is given to video in the traffic
to and from the specified IP. Noted that this feature is only available if TI wireless station card and
TI’s ADSL2/2+ modem are used.
; IP Address: The LAN-side IP with the preferred bandwidth. This field is related to the
Video Blast Support and is enabled when Video Blast Support is checked. You can
enter up to two IPs for the Video Blast Support features.
; Protocol: The protocol used by the IP address. This field is related to the Video Blast
Support and is enabled when Video Blast Support is checked. There are three options:
None, TCP, and UDP. You will need to select TCP or UDP for each IP.
; Dest Port: The port number used by the IP address. This field is related to the Video
Blast Support and is enabled when Video Blast Support is checked.
„ Apply: Click Apply to complete the setting.
„ Cancel: Click Cancel to ignore all the changes.
„ To complete and save the setting, click Save All after clicking the Apply button.