6 new connection - clip connection setup – Home Dynamix ANEXX A User Manual
Page 62
4 Ports 11g Wireless ADSL2/2+ Router
55
4.3.1.1.6 New Connection - CLIP Connection Setup
CLIP: When CLIP mode is selected, the following screen will pop-up. The Classical IP over ATM (CLIP)
support provides the ability to transmit IP packets over an ATM network, CLIP support will encapsulate IP in
an AAL5 packet data unit (PDU) frame using RFC1577and utilizes an ATM-aware version of the ARP
protocol.
Name: Enter the CLIP connection name. The name must be unique and must not contain spaces
and must not begin with a number.
Type: Connection Type : CLIP.
Options: Click to enable “NAT” and/or “Firewall” functionality. Default is “Enable”.
CLIP Settings:
;
IP Address: Enter the IP Address provided by your ISP.
;
Mask: Enter the Subnet mask specified by your ISP.
;
ARP Server: Address Resolution Protocol (ARP) server. Leave as Default ( 0.0.0.0 ) unless
advised by ISP.
;
Default Gateway: Enter the Default Gateway as specified by the ISP.
PVC Settings:
;
VPI: Virtual Path Identifier is a virtual path used for cell routing that is identified by an eight bit
field in the ATM cell header. The VPI field specifies this eight bit identifier for routing.