Home Dynamix ANEXX A - Manual (Page 59)

4 Ports 11g Wireless ADSL2/2+ Router 52
4.3.1.1.5 New Connection - Bridge Connection Setup
Bridge: When Bridge mode is selected, the following screen will pop-up. A Bridged connection basically
disables the routing, firewall and NAT features of the 4 Ports 11g Wireless ADSL2/2+ Router. In a Bridged
connection, the 4 Ports 11g Wireless ADSL2/2+ Router acts as a modem or hub, and just transmits packets
between the WAN interface and the LAN interface. A Bridged connection assumes that another device is
providing the routing functionality that is now disabled in the 4 Ports 11g Wireless ADSL2/2+ Router.
„ Name: Enter the Bridge connection name. The name must be unique and must not contain spaces
and must not begin with a number.
„ Type: Connection Type : Bridge.
„ Sharing: Select “Disable”, “Enable” or “VLAN” sharing. Default setting is “Disable”. The VLAN
needs to be selected to create VLAN.
„ Options: Click to enable “NAT” and/or “Firewall” functionality. Default is “Enable”.
„ VLAN ID: If “VLAN” is selected, manually enter the “VLAN ID” and select “Priority Bits” from
the drop down manual.
„ Priority Bits: Priority is given to a VLAN connection from 0-7, 0 being the highest priority.
„ Bridge Settings:
; Encapsulation: Select the encapsulation type (LLC or VC) according to the information
provided by the ISP.
; Select LAN: Up to three LAN Group can be specified. Select your LAN Group from the drop
down manual.