Home Dynamix ANEXX A - Manual (Page 144)

4 Ports 11g Wireless ADSL2/2+ Router 137
4.6.1 TOOLS - System Commands
Figure below shows the default System Commands screen, which can be accessed by clicking on the
System Commands link.
„ Restart: This button enables you to restart the system. If you have not saved your configurations,
the 4 Ports 11g Wireless ADSL2/2+ Router will revert back to the previously save configuration
upon re-starting.
Note: Connectivity to the unit will be lost. You can reconnect after the unit reboots.
„ Restart Access Point: Use this button to restart the Wireless Access Point. It is important to
Restart the Access Point any time when changing the Wireless Setting.
„ Restore Defaults: Use this button to restore factory default configurations.
Note: You will be redirected to the 4 Ports 11g Wireless ADSL2/2+ Router Homepage after the
unit has successfully been restored to factory default configurations.