Home Dynamix ANEXX A - Manual (Page 149)

4 Ports 11g Wireless ADSL2/2+ Router 142
4.6.4.1 Update Gateway Procedure
Use the following procedures to update firmware for your 4 Ports 11g Wireless ADSL2/2+ Router.
1. Click Browse and select the file to update. The file name will appear in the Select a File field.
Note—The file size should not exceed 3.5MB.
2. Click Update Gateway. The status of the uploading will appear at the bottom of the screen. When the
upload is finished, the 4 Ports 11g Wireless ADSL2/2+ Router will reboot and you will be prompt to log
in again.
3. Enter your Username and Password to log back in.
4. If you want to make sure the firmware is properly upgraded, go to Status /Product Information and
check on the Wireless Firmware version information on the Product Information screen
5. If you would like a copy of the configuration file (config.bin) saved to the 4 Ports 11g Wireless ADSL2/2+
Router flash, click Get Configuration to download it.