Home Dynamix ANEXX A User Manual
Page 132
4 Ports 11g Wireless ADSL2/2+ Router
125
;
Both: If both is selected, the access point will perform shared-key authentication, then
open-system authentication.
Encryption Key: This field is enabled when the WEP security field is checked. The key's value
that is used when the security configuration is set to legacy. The key length must match the WEP
cipher. This field is not used when the security configuration is set to 802.1x or WPA.
;
For 64 bit WEP, enter 10 Hexadecimal digits (any combination of 0-9, A-F).
;
For 128 bit WEP, enter 26 Hexadecimal digits (any combination of 0-9, A-F).
;
For 256 bit WEP, enter 58 Hexadecimal digits (any combination of 0-9, A-F).
WEP Cipher: This field is enabled when the WEP security field is checked. You can select from 64
bits, 128 bits, and 256 bits. The WEP cipher that is used when the security configuration is set to
Legacy or 802.1x. This field is not used when the security configuration is set to WPA.
Apply: Click Apply to complete the setting.
Cancel: Click Cancel to ignore all the changes.
To complete and save the setting, click Save All after clicking the Apply button.