Home Dynamix ANEXX A - Manual (Page 167)

4 Ports 11g Wireless ADSL2/2+ Router 160
What is a Gateway?
The Internet is so large that a single network cannot handle all of the traffic and still deliver a reasonable level
of service. To overcome this limitation, the network is broken down into smaller segments or subnets that can
deliver good performance for the stations attached to that segment. This segmentation solves the problem
of supporting a large number of stations, but introduces the problem of getting traffic from one subnet to
another.
To accomplish this, devices called routers or gateways are placed between segments. If a machine wishes to
contact another device on the same segment, it transmits to that station directly using a simple discovery
technique. If the target station does not exist on the same segment as the source station, then the source
actually has no idea how to get to the target.
One of the configuration parameters transmitted to each network device is its default gateway. This address
is configured by the network administrators and it informs each personal computer or other network device
where to send data if the target station does not reside on the same subnet as the source. If your machine
can reach all stations on the same subnet (usually a building or a sector within a building), but cannot
communicate outside of this area, it is usually because of an incorrectly configured default gateway.