Hughes SATELLITE HN9000 - Manual (Page 108)

A pop-up window appears that briefly identifies each state code. If you do not see the pop-up
window, it may be hidden by other windows; if this happens, minimize other open windows.
2. Scroll down to see the entire list of state codes.
Connectivity Test page
You can use the Connectivity Test page to test the connection between the satellite modem and
the satellite. Instructions for the test are provided on the screen. No special configuration is
required.
Figure 56: Terminal Connectivity Test page
HN9000 Satellite Modem Installation Guide
92
1037576-0001 Revision E
System Control Center Chapter 9