Hughes SATELLITE HN9000 - Manual (Page 96)

Transmission Information page
The Transmission Information page shown in Figure 52: Transmission Information page on
page 80 displays information about data transmissions from the satellite satellite modem.
Figure 52: Transmission Information page
The operational parameters listed on the Transmission Information page are shown in a tabular
format. The first (left) column identifies the parameter categories:
• Satellite Interface Statistics – Contains information on transmit status and signal strength,
as well as transmission-related error messages.
• Traffic Statistics: Transmit – Contains statistical information on the specific data transmitted
to the satellite from this satellite modem.
Typical values for Transmission Information parameters
The following table lists typical values and the range of values for parameters on the Transmission
Information page. This information may help you understand the values displayed by a customer's
satellite modem.
To see the definition of any parameter, click the parameter name on the screen.
Table 14: Transmission Information parameters – typical values and range
Range of values Typical values Parameter
Satellite Interface Statistics (parameter category)
Up – The modem is transmitting
signals to the satellite.
Up Transmit Status
HN9000 Satellite Modem Installation Guide
80
1037576-0001 Revision E
System Control Center Chapter 9