Figure 36: welcome screen – Hughes SATELLITE HN9000 User Manual
Page 73
6.
After the SAN and PIN information is entered and validated, a welcome screen appears that
includes the customer’s name (
on page 57).
Figure 36: Welcome screen
The box near the middle of this screen displays the modem’s Site ID, Terminal IP Address,
and Terminal Subnet Mask. The customer should write down this information or use the
Print button to print this screen for reference. If the customer is going to use a public IP
address (also known as a routable address), this screen shows the address to use to configure
the customer’s computer or other IP devices connected to the satellite modem.
7.
The License Agreement screen (not shown here) is an agreement to use the satellite modem
activation software.
8.
At one point a screen titled Downloading Software appears (
on page 58). To continue the installation, the customer must click the yellow
bar at the top of the screen. The add-on is an ActiveX Control. For additional information,
see the text on the screen.
57
HN9000 Satellite Modem Installation Guide
1037576-0001 Revision E
Chapter 7
Activating the HughesNet service