Hughes SATELLITE HN9000 - Manual (Page 98)

Figure 53: Terminal Status page (top part)
The operational parameters listed on the Terminal Status page are shown in a tabular format.
The first (left) column identifies the parameter categories:
• Overall Status – Shows the major features such as dial backup or acceleration. (Some listed
features may not be included in your service plan.)
• Transport Interface Receive Statistics – Indicates messages received and decoded by the
satellite modem from the satellite.
• Transport Interface Transmit Statistics – Indicates messages being queued up by the satellite
modem for transmission to the satellite.
• LAN Interface Statistics – Shows traffic across the LAN interface to the satellite modem.
• IP Forwarding and Routing Statistics – These refer to system control messages.
• Local IP Interface Statistics – Sum of various counts of messages.
• Dial Backup Status – Count of dial backup traffic if the feature is enabled. (Some listed
features may not be included in your service plan.)
• TCP Acceleration Statistics – Counts of messages and connections used between the satellite
modem and its destination if the feature is enabled. (Some listed features may not be included
in your service plan.)
• SSL Acceleration Statistics – Counts of SSL traffic if the feature is enabled. (Some listed
features may not be included in your service plan.)
• DNS Caching Statistics – Counts on local storage of data if the feature is enabled. (Some
listed features may not be included in your service plan.)
• Management Statistics – Various internal network management traffic counts.
• Turbo Page Statistics – Counts of various web page requests and objects if the feature is
enabled. (Some listed features may not be included in your service plan.)
HN9000 Satellite Modem Installation Guide
82
1037576-0001 Revision E
System Control Center Chapter 9