Terminal, Terminal status page – Hughes SATELLITE HN9000 User Manual
Page 97
Range of values
Typical values
Parameter
Down – The modem is not
transmitting signals to the satellite.
Any whole number.
0
Tx Error
Not applicable (parameter reserved
for future use).
OK
Transmit Path Fault
Traffic Statistics: Transmit
Any whole number.
0
Total Satellite Packets Transmitted
Any whole number.
0
Total Satellite Packets Dropped
Red flags on Transmission Information page
If you see a red flag next to Transmit Status on the Transmission Information page, see Transmit
Status in
Table 11: Explanation of red flags on System Status page
on page 76. The information
for Transmit Status in that table also applies to the Transmission Information page.
Terminal Status page
The Terminal Status page displays information about the operational state of the satellite modem
and operational statistics such as messages and packets sent, received, and dropped. It indicates
whether acceleration is enabled and provides a count of traffic that moves across the LAN to
the satellite modem.
81
HN9000 Satellite Modem Installation Guide
1037576-0001 Revision E
Chapter 9
System Control Center