Hughes SATELLITE HN9000 User Manual
Page 37
2. Type
169.254.0.1
in the browser address bar and press Enter.
The System Control Center home page opens.
Note: Use
169.254.0.1
to open the System Control Center only before the satellite
modem is commissioned. After the modem is commissioned, use the address
www.systemcontrolcenter.com
or
192.168.0.1
. To use
192.168.0.1
, the installer’s
laptop must be configured for two addresses as described in
IP address on the installer laptop
on page 15, and DHCP must be enabled.
Figure 12: System Control Center home page
The System Status and System Info buttons are always visible near the top of the System
Control Center screens. Three additional buttons are visible after the modem has been
commissioned and is operational.
3.
Click the small icon indicated by the arrow in
Figure 13: Icon for opening Advanced Pages
on page 21.
Figure 13: Icon for opening Advanced Pages
21
HN9000 Satellite Modem Installation Guide
1037576-0001 Revision E
Chapter 3
Installing the satellite modem