Hughes SATELLITE HN9000 - Manual (Page 42)

Note: When you install the antenna, be sure to set LHCP or RHCP as indicated on the
Terminal Pointing Info screen (Setting for ODU Polarization). If you set polarization
incorrectly—for example, LHCP when RHCP is specified—the satellite modem will
not receive a signal.
For explanation of the information in the Terminal Info section (lower part) of the Terminal
Pointing Info screen, see
Table 6: Parameters in Terminal Info section (appears on two
installation screens) on page 38.
HN9000 Satellite Modem Installation Guide
26
1037576-0001 Revision E
Installing the satellite modem Chapter 3