Harley-Davidson RIDE-ON 74287 - Manual (Page 12)

Assembly
TM
• Fit the motor harness between the vehicle body tabs.
Motor
Harness
Narrow
Rectangular
Opening
Tab
Tab
Top View
• Fit the tabs on the left footboard into the slots in the left
side of the vehicle frame. Make sure both tabs are in
the slots.
Hint: You may need to squeeze the left footboard in order
to align the tabs with the slots.
• Insert two #8 x 3 /
4
" screws into the left footboard as
shown. Tighten the screws using a Phillips screwdriver.
Do not over-tighten.
Left
Footboard
Tab
Tab
Slots
TM
• Insert four #8 x 3 /
4
" screws through the vehicle body and
into the vehicle frame. Make sure the holes in the
vehicle body and frame are aligned.
• Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
Vehicle
Frame
Vehicle
Body
TM
• Position the vehicle body on top of the vehicle frame.
• Fit motor harness connector up through the large
rectangular opening in the vehicle body.
• Fit the high speed hook-up connector through the
square opening near the front of the vehicle body.
Square
Opening
Motor
Harness
Connector
Vehicle Frame
Vehicle
Body
Large
Rectangular
Opening
High Speed
Hook-Up
12
4
5
6
7