Harley-Davidson RIDE-ON 74287 - Manual (Page 21)

Assembly
TM
• Slide the fork axle up through the bottom of the front
fork, through the neck and steering stop, and out the top
of the front fork.
• Fit a .354 (small diameter) cap nut on the end of the
fork axle.
• Support the fork axle and tap the cap nut with a hammer
to secure it on the end of the axle.
Hint: You may need the help of another adult to hold the
front axle in place while you secure the cap nut.
• Pull on the .354 cap nut to make sure it is secure on the
fork axle.
.354 (Small Diameter)
Cap Nut
.354 (Small Diameter)
Cap Nut
Fork Axle
Front
Fork
Fork Axle
• Place a .354 (small diameter) cap nut on a flat surface,
inside up.
• Fit the end of the fork axle into the cap nut.
• Tap the opposite end of the fork axle with a hammer to
secure the cap nut on the axle. Pull on the cap nut to
make sure it is securely assembled.
TM
Steering
Stop
Neck of
Vehicle Body
• Fit the tab on the steering stop into the curved slot in the
lower steering bushing .
• Hold the steering stop in place.
• Slide the handlebar assembly on the neck of the vehicle
frame and over the steering stop . 2
1
2
1
Handlebar
Assembly
.354"
.354 Cap Nut
.354"
.354 Cap Nut
21
40
41
42