Harley-Davidson RIDE-ON 74287 - Manual (Page 16)

Assembly
• Fit the rear headlight assembly to the front head-
light assembly.
• Insert six #8 x 3 /
4
" screws through the rear headlight
assembly and into the front headlight assembly, as shown.
• Tighten all six screws using a Phillips screwdriver.
Do not over-tighten.
Front
Headlight
Assembly
Rear
Headlight
Assembly
Front Headlight Assembly
Flashing Light
Assembly
Notch
Groove
Tab
• Place the flashing light lens on the light base. Align the
notch in the flashing light lens with the notch in the
light base.
• Align the notch in the flashing light assembly with the
tab in the front headlight assembly. Fit the flashing light
assembly into the groove in the front headlight assembly.
Front Headlight
Assembly
Wire Retainers
Notch
Wire
• Press to fit the light and sound box wire into each of the
seven retainers in the front headlight assembly.
• Position the light and sound box wire through the notch
on the edge of the front headlight assembly.
Flashing Light Lens Notch
Light Base
Notch
DO NOT INSERT
SCREWS HERE
16
21
22
23
24