Hayes Microcomputer Products DIVA T/A - Manual (Page 32)

DIVA T/A PC Card User’s Guide 32
5 Select the Primary Location tab.
Note: The screen above depicts the North American version of
the Configuration Tool; if you are using an international
version of the software, the screen does not contain Service
Profile ID fields
.
Specify the Primary Location’s parameters.
Parameter Description and Values
Switch Type Specifies the ISDN switch type used by your
ISDN service provider.
North American firmware: For most
locations Auto-Detect should be selected
(Default). If the ISDN Switch Type cannot be
automatically detected, specify National
ISDN-1 (NI-1) or AT&T (5ESS)
International (Excluding North America)
firmware: Europe (Euro ISDN), Japan (INS-
Net64), and Australia (TPH1962). The
default setting is Europe.
Note: Australia has two different switch types
available: TPH1962 and EuroISDN. Ask your
ISDN provider how to set your switch type.
Use 2 Numbers Activates the “2 nd Number tab”. Use the
second number tab if your ISDN provider
assigns two numbers.