Hayes Microcomputer Products DIVA T/A - Manual (Page 60)

DIVA T/A PC Card User’s Guide 60
Dialing with Multilink PPP
When you establish a Multilink PPP connection, each B-channel
connects to a remote-directory number. In some ISDN
implementations each B-channel connects to a unique number. If this
is the case, enter both numbers and separate them with the character
“~” or “&”. For example, to make a Multilink PPP connection to the
numbers 1-514-555-2345 and 1-514-555-2346 enter the numbers as
follows:
Note: If your ISDN implementation requires two numbers and
BACP/BOD is enabled (on both your DIVA T/A and the remote ISDN
device), you have the option of entering only one number. BACP will
try to discover the second number and connect to it. If you know the
two numbers, however, it is recommended that you enter both.
For Windows 95 and Windows NT 4.0 only. If you use “~” or “&” to
separate the Phone-Numbers, deselect the “Use Country and area
code” parameter on the Properties tab of Dial-Up Networking (it
doesn’t work properly when “~” or “&” used). Manually enter the
Country Code, Area Code, and PBX Prefix (if required) for both
numbers.
If both B-channels connect to the same number, the number need only
be entered once.
Contact your Internet Service Provider (ISP) if you are not sure
whether you need one or two remote numbers.