Hayes Microcomputer Products DIVA T/A User Manual
Page 56
DIVA T/A PC Card User’s Guide 56
Updating the DIVA T/A INF file (Windows
95/Windows NT 4.0)
Follow the steps below to update the DIVA T/A INF file:
1
From the Windows Taskbar, click Start. Select Find. Select
Files.
2
Click Browse, and select the Windows\INF directory.
3
Click Advanced.
4
Enter "Eicon DIVA T/A" in the "Containing" field, and click
Find.
5
Rename each file found with the extension OLD.
Note: You should see the file: OEM#.INF or MDMEIC.INF.
6
Close the Find panel.
7
Open Control Panel and double-click the Modems icon.
8
Remove all listed DIVA T/A modems in the Modems applet.
Follow the steps below for the appropriate platform
Windows 95
9
Remove and re-insert your DIVA T/A.
10
When prompted for the disk or driver, select the directory
containing the new INF file.
Windows NT 4.0
9
From the Modems applet, click Add, then click Have Disk.
10
When prompted, enter the path to the new INF file, then click
OK. The DIVA T/A will be detected.
11
Select Eicon DIVA T/A, then click Next.
12
Select the appropriate COM Port, click Next, and then click
Finish.
13
If you have RAS installed, you must re-configure RAS.
14
From the RAS setup, remove the listed DIVA T/A and then
re-add it. Refer to the RAS online help for removing and
adding modems.