Hayes Microcomputer Products DIVA T/A - Manual (Page 36)

DIVA T/A PC Card User’s Guide 36
Parameter Description
AutoSPID
Settings Note: Available on North American models
only.
Select the location to which the AutoSPID
settings will be saved on power up.
For more information on AutoSPID, refer to
page 76.
8 Click OK or Apply to save the selections made in steps 1-7. The
Profiles window opens.
9 If you want the profile to be active when you restart the DIVA
T/A, select its name from the Active Profiles pick list. If you
want a different profile to be implemented, select it from the list.
10 Click OK to save the selection. The DIVA T/A restarts
automatically; the profile you selected in step 9 is implemented.
Your DIVA T/A is ready for use.
After the DIVA T/A has restarted, check the D LED on the DIVA
T/A. If the LED is steady or flashing intermittently, the DIVA T/A is
working correctly; if the LED is not steady, check your configuration
and try again. Refer to “LED Status Indicators on the DIVA T/A” on
page 81 for more information.
For more information on using your DIVA T/A go to the section
“Using the DIVA T/A” on page 58.